[Solved] Network Not Showing in Huawei Honor Holly After ROM Flash Fix

Fix : Network Showing Problem Honor Holly

Later these days I have tried to flash CyanogenMod ROM on Honor Holly Mobile using Phils Touch Recovery, but it is gone worse. After flashing the ROM, SIM card not taken, and the network is not shown. Also some messages are pop up like Keyguard stopped, Phone stopped etc.

I tried different ROMs to fix the problem, but it is not worked. After that I have decided to hard flash the mobile. After hard reset by using SP Flash tool, it is worked and the phone is up now.

Honor Holly

Download Following File

Huawei Honor Holly Stock Full Pack (1.32 GB)

(File from official Huawei website)

Steps To Flash using SP Flash Tool

 - Extract downloaded zip, you will get a Software folder, the folder will be look like below image

- Then open the upgrade tools& drivers folder, you will find some zip files there like below image

- Extract 'Huaqin Android Driver All-in-One.rar' file and install the driver. (File contains both 32 and 64 bit software)

- After that extract 'SP_Flash_Tool_exe_Windows_v5.1352.01.rar' file, you will get following list of files

- You need to run the 'flash_tool.exe' in that folder, and that will open SP Flash tool, before doing that go to the parent 'Software' folder and open the 'USB upgrade' folder shown in the first step.

- You will get a following list of files in that folder

- Extract the 'Holly-U19V100R001C583B105.rar' file to the 'SP Flash Tool' location. The file contains a folder named 'Holly-U19V100R001C583B105_DCC' which contains all files needed for the hard flash, it is shown below

- First of all disconnect Honor Holly device from your computer and switch of the mobile.

- Now open SP Flash tool from the extracted location

- First you need to take the Options from 'Options -> Option', and verify that in connection the settings are correct as shown in the below image.

- After that load the scatter file by clicking on 'Scatter-loading' button, (Scatter file is in the 'Holly-U19V100R001C583B105_DCC' folder).

- It needs little time to load the scatter file in SP flash tool

- After loading scatter switch 'Download Only' mode to 'Firmware Upgrade'

- Finally the SP flash tool will be like below image

- Now click on the 'Download' button in SP Flash tool

- And after that connect the Honor mobile to PC (Don't switch on)

- SP Flash tool will automatically detect the mobile and will do all flash automatically, you just need to wait for 10 or 15 minutes.

- After all things get completed an OK message will be shown to you.

- Then you can disconnect the mobile and switch it on.

- Now it will work everything.

If you do have any queries just comment here.